Writing in Code - The Basics

Writing in Code - The Basics

We live in a societies with abilities to send messages (emails) instantaneously across the world, but it is that same convenience that makes it a vulnerability, we rely on systems outside our control to deliver them. I.e. Your computer, in your control sends email to a server outside of your control that is suppose to send the email to the recipient of the email, but there is a flaw, you don't generally control the junction point, the server.

It has come to my attention that the Patriots of the Iranian Freedom Movement need information on how to make cryptic (secret) messages to pass along information that will circumvent intelligent and security services monitoring. Also, however, I have been told the intelligent and security services have been interfering with cell phone sms messages and internet access. Well, my friends you can still exchange information stealthy manner using classical methods for writing secret messages that upon normal observation look like either blank paper or something it isn't.

Throughout history, civilizations have relied on different methods to pass along secret messages. Some cultures developed early methods to encode their messages and others used what some call "invisible ink". The invisible ink techniques require special methods to "develop" what is written on the paper the message is on. Below are links to some articles and a video on how to make cryptic messages and make and use invisible ink methods of writing secret messages.

Please note, all these methods below will probably be known to the intelligent and security services. The best suggestion I can make is to mix up the methods you use to pass along the information. Never use the same method more than a few times.

Note: I will add more information on encoding techniques in the next few days.

Face the enemy head on with knowledge to take advantage of his weaknesses, for ye shall overcome and be victorious my friends.

Methods to Make and Use Invisible Inks:

Secret Writings - Invisible Inks by Center for Forbidden Knowledge -Dark Corner - Egyptian Website.

How to Write Secret Messages with Scytale by Amanda Morin on EHow.com.

Details on Invisible Inks with Links: by Wikipedia.

Video by Anderson Video Productions (simple, but classical technique for making invisible ink and how to develop it.)

Semi-Bullet & Knife Resistant Lamellar Body Armor

Semi-Bullet & Knife Resistant
Lamellar Body Armor

There was a request for additional information on body armor to help the Patriots of the Iranian Freedom Movement. There have been a number of patriots in the Movement that have been killed from gun fire and stabbings from the Iranian security forces. Recently, I posted the information contained in BodyHammer and I pray that it helped the protesters. The Patriots of the Iranian Freedom Movement are incredibly brave and I pray that something from the Help and Hope for the Green has helped helped save at least one life.

We always need a disclaimer, I'm sorry, but though this is intended for the Patriots of the Freedom Movement in Iran, there are stupid others who will see this. The Stupid will not take personal responsibility for what they are given and blame those that gave them the technology for their stupidity. So here it is: Like it says in the YouTube video instructing you how to make the body armor. I accept no responsibility for providing this information and it is for educational purposes only. This video is the property of the maker and they, and I, also cannot be held for any reason, or liability from making this product and using it for in anyway other than for educational or recreational/costume purposes. So don't do this at home, MythBuster's Quote.

Your enemy has technology and tactics for now that you do not have, one day soon that will change, but for now all I can do is offer what is asked of me. I will do all I can, to the best of my abilities to supply what is requested. It was requested that I post find and post something for additional types of body armor not found in Bodyhammer. I have found such a thing, it is a YouTube Video that explains how to make individual sections of Lamellar body armor out of sheet steel and rubber matting. I will let the video explain how to make the individual sections of the armor, but I can recommend ways to link it together like traditional lamallar armor of ancient times.

Definition of Lamellar Body Armor: "Lamellar armour is a kind of personal armour consisting of small plates (lames) which are laced together in parallel rows. Lamellar armour evolved from scale armour, ^[1] from which it differs by not needing a backing for the scales. It is made from pieces of lacquered leather, iron, steel or horn held together with silk, leather thongs, or cotton thread. When the lames are made of leather they would often be hardened by a process such as cuir bouilli or lacquering." Source Wikipedia.

The video describes how to make individual pieces of the armor, grouped together it is called Lamellar body armor. I will explain the next step. Follow the video for making each individual piece of armor, but with one major difference and this important. You need to link the pieces together. Use the illustration in the Wikipedia article to show you how to link the lamellar sections together.

http://en.wikipedia.org/wiki/File:Lamellar_lacing.gif

Each piece has sections and as you make them you will need to make points (holes) that you can lace/link the pieces, it is important that the holes of each piece of the individual sections are aligned. The illustration is self explanatory.

Video: How to make (Lamellar) Body Armor:



Courtesy of SlurpeePerson.

Please tweet @blckpaw if you feel you need more. Bless be you and I will always do what I can to help the Patriots of the Iranian Freedom Movement.

Defensive Protest Tools against Riot Police and Basij

There are times when you must act, others with their efforts for freedom and assisting in their struggle to defend themselves against oppression. I made the commitment to assist the Freedom Movement of Iran and their fight for freedom and freedom of voice. My Help and Hope for the Green Blog has evolved into more than initially I thought it would be. I have struggled with what information to put up and have left others to put up what I can't. The end goal of my efforts are to give the members of the Freedom of Iran tactics and knowledge to defend themselves against illegitimate and tyrannical regime of Khamonie and Ahmadinejad. The regime has betrayed the people levels that show the world the true evil it has become and supports.

The instructions below and linked videos explain how to make a device called a pepper spray smoke grenade with a ring pull fuse (PSSG). The knowledge instructions for how to make the device were give to me by a fellow supporter of the Green Movement, but who shall never been named.

The PSSG can be made from common household items found almost any where in the world. It is designed for ease of use and mobility. There is a list of step by step instructions in how to make the device, what materials are needed and instructional videos included for each component of the PSSG.

PSSG is a tactical device that is non-lethal and will allow Freedom Movement protesters a tool to use against the Iranian Riot Police and Basij. All instructions and tactics given are for educational purposes only and for the soul use of the Freedom Movement members in Iran. I will not take responsibility for use of this device by anyone and again, the instructions to make the device and tactical its tactical use are for educational purposes only. To quote the Myth Busters, "don't try this at home."

The PSSG is the exact same type of technology the Iranian Riot Police and riot police all over the world use against protesters. The idea is to cause chaos and disorientation among the protesters. However, the PSSG technology being given to the Freedom Movement has one added advantage over typical riot police pepper spray grenades, the PSSG also can be used as a "chuck and run" device.

The meaning of "chuck and run" is that the PSSG is intended to used as a tool for the Freedom Movement to use against the Iranian riot police and Basij when they are being attacked. The PSSG would ideally be thrown into a group of riot police as attack protesters trying to escape. The PSSG would go off in the middle of the group of riot police or basij spewing out green smoke with pepper spray. The green smoke would act to put up a screen between the flee protesters and the riot police/basij. The pepper spray component would have the same tactical use as the police use it on protesters.

The tactical nature of the PSSG has advantages, and disadvantages which need to be mentioned and stressed!!!! as very important! Use of the PSSG can only be used against the riot police and basij and all related parties. Once the device is activated, it can not be stopped. It is important that the user knows how to use it and to understand that the PSSG device does NOT care if basij or Freedom Movement members are affected by it. The PSSG should be used right before protesters start to flee and it is very important to be upwind of the riot police before activating and throwing it. Be warned, use of the device will affect all of those around it, and that does mean innocents in the streets just as the riot police's tear gas does. So always keep this in mind before using the device.

The suggestions from the supporters of the Movement who gave me the instructions for the PSSG are to make two devices, one being just the smoke bomb ring pull fuse type and them the PSSG, being the smoke bomb ring pull fuse with the pepper spray component. The regular smoke bomb can be used without any chance of any innocent bystanders being hurt, but still create a cloudy shield for the protesters to find escape routes while the riot police struggle to see.

Ultimately, it is up to the members of the Iranian Freedom Movement to decide how they will use the PSSG and non-pepper spray smoke bomb grenade. Please use the knowledge wisely and the goal is allow to have the Green Movement members a device that is non-lethal to defend themselves against riot police. The ultimate goal of providing the knowledge to make the PSSG is to save the lives of the innocent members of the Iranian Green Movement. Again, use the knowledge wisely.

How to Make a Pepper Spray Smoke Grenade

and

Defensive Tactical Use

Against Riot Police and Basij

Instructions in how to make a Pepper Spray Smoke Bomb grenade with ring pull fuse:

To make the PSSB grenade with a pull ring fuse make the components in the following order as presented below:

Note: This formula is designed to make a pepper spray concentration approximately 4 to 5 times what you typically see

Ring Pull Fuse Components & Instructions:

• Large paperclips, one for each grenade.
• A box of wooden stemmed matches with strikers on the sides, one for each grenade.
• 6 to 7 cm section of plastic drinking straw (approximately the same length as the wooden matches), approximately 1 cm in diameter, one section for each grenade.
• Cloth-tape, duct tape or something similar.
• Rubber bands, one for each grenade.
• Tissue paper, i.e. toilet paper.

1. Open the box of matches and place 8 matches to the side. Next take a knife take the remaining matches and carefully break off the head of the wooden stem. After all the match heads are removed from the stem place them in the matchbox.
2. Next take a section of straw and seal off one end of the straw with tissue paper.
3. Take the match head and pour them into the piece of plastic straw and then seal the top end of the straw with tissue paper like you did with the bottom end.
4. Now take the 8 matches you set to the side and encircle the outside section of tissue with them. Seat the head of the match on the outside edge of the straw. Secure the matches with tape, for example duct tape. We will call this the “core” section of the fuse.
5. Now take your paperclip and straight it out and make it in to a ring. Twist the ends of the paperclip leaving a twist end about 1 cm in length.
6. Okay, now take the empty matchbox and using a pair of scissors cut the striker ends of the matchbox off.
7. Take the matchbox strikers, striker end facing in, and secure them with tape to the twisted ends of the paperclip. We will call this the “ring” section of the fuse.
8. Finally, take the “ring” section and drape the striker end over the “core” section of fuse. Now take a rubber band and wrap it tightly around striker section of the “ring”, securing it to the “core”. Now your fuse is ready, place it to the side.

Note: Fuses can be made in advance and stored, if you do, store them in a

cool and dry place away from sunlight.

Ring Pull Fuse Instruction Video:

Pepper Spray Formula Ingredients & Instructions:

• 10 tablespoons = 150 cc of ground hot red pepper, for example cayenne pepper. (Cayenne pepper is one of the components in the pepper spray used by riot police.)

• Medium sized bottle of rubbing alcohol, also known as, isopropyl alcohol that is used for in first aid.

• Baby Oil, or any similar oil that contains mineral oil as a primary component.

• Glass jar, approximately 150 cl to 250 cl in volume, with a screw on top.
• Similar volume jar for the post-mixing process.
• A 20 cm by 20 cm, or so, piece of cloth the mixture can be filtered with.
• 
  

Pepper Spray Component Video:

1. Take the 150 cc of ground pepper and place it into a glass container, approximately 150 cl to 250 cl., with a screw on top.
2. Now pore the rubbing alcohol (isopropyl alcohol) into the glass jar, covering approximately 1 cm above the ground red pepper powder.
3. Now grind & stir with a mortar, an ice cream scoop will work too or a blender if you have one would be ideal, for 10 minutes!
4. Now add enough baby oil to the mixture to increase the fluid leave approximately 0.5 cm. Now mix for two minutes!
5. Now take the second glass jar and cover the top of the jar with the filtering cloth. Using your hand tap the filtering cloth into the jar to form a “cone” inside the jar. Slowly pore the pepper mixture onto the cloth so liquid portion of the solution is separated from the particles of the mixture.
6. Place the strained hot pepper/rubbing alcohol/baby oil solution to the side.
7. Now place it to the side.

Ingredients and instructions for making the smoke bomb component of the Pepper Spray Ring-pull fuse grenade:

• Granulated sugar, type used in baking.
• Salt Peter, Potassium Nitrate, typically found in a garden shop.
• Baking soda, calcium carbonate, type used in cooking.
• Green organic ground powder dye.
• Cardboard tubing from toilet paper rolls.
• Tape, use duct tape or similar.
• Seal one end of the cardboard tubing beforehand.
• Sections of cardboard tubing big enough to set the toilet paper rolls in and about half again as long as the cardboard toilet paper rolls.
• Seal one end of the cardboard tubing beforehand
• Medium sized-sauce pan or pot used for cooking, something like you would use to boil water.
• One plastic pen approximately the same size and the diameter of the ring fuse.
• NOTE! During the whole process you MUST keep stirring the mixture or it will harden and you will have to start over!
• Towards the end of the end of the process the mixture will become pasty in nature.

IMPORTANT!!! The pepper spray solution will become heated in the mixture and make fumes that will irritate the eyes, use safety goggles and a surgical mask to prevent breathing in pepper spray mixture.

1. Add 60 grams of saltpeter to the saucepan and then add 40 grams of granulated sugar. Slowly start to heat, stirring continuously and use a low to medium setting, the mixture until the sugar starts to caramelize, like it would when you would do making candy.
1. The mixture at this point should look like semi-smooth peanut butter.
2. After the mixture melts into a paste, add one tablespoon = 150 cc of baking soda, and stir it into the sugar and saltpeter mixture. Keep stirring until you are sure the baking soda is properly mixed.
1. The paste should look like thicker peanut butter.
3. Now stir in the green organic powder dye until you get the shade of green to the paste you want.
4. Now take the pepper spray solution and stir it into the mixture.
5. Now take the cardboard tubing, with one end sealed and fill it with the pepper spray smoke bomb paste ¾ of the way full.
6. Take the pen and stick it the center of the mixture. You want to insert the pen so far enough in that the ring fuse will seat in the fuse about 2 cm.
1. Allow the pen to set in the pepper spray smoke bomb paste approximately one hour, or until the paste is semi-firm.
2. Remove the plastic pen and insert the fuse and allow the paste to harden, approximately another couple of hours so the paste is completely cured.
3. Do not allow the striker section of the fuse to be incased by the paste, this will make it difficult to ignite the fuse.
7. After the ring fuse is firmly set take the cardboard section of the bomb and insert into the larger section of cardboard tubing, there should be approximately 3 cm of space between the two top sections of tubing. Pack the space with cotton. The base of the ring section of the fuse should be at approximately the same level as the top of the second piece of cardboard tubing.
8. Lastly, tape, with duct tape or similar, the outside of the larger tube (this will protect the hands), enclosing the top of the cardboard tubing, but leaves the ring section exposed.

How to make Smoke Bomb Component Video:

Some experimentation may be needed. This device can be used in a number ways.